The catalogue
We manufacture laser components, sources, turnkey systems & customised solutions.
Continuous-wave UV laser
L1-RC-V355-3-SM
- Family
- Laser sources
- Wavelengths
- 355, 311, 266 nm
- Availability
- Built to order
Laser sources
Ten fibre sources, from a 24 V air-cooled OEM module to a 60 kW multi-module cabinet, and from continuous wave through nanosecond and quasi-continuous pulses. Ultraviolet, green and the visible range are covered by frequency conversion rather than by a second technology, so one supplier answers for the whole wavelength span. Specified by what the process needs at the workpiece, not by the largest number on the sheet.
Continuous-wave UV laser
Single-mode continuous-wave ultraviolet source at 355, 311 and 266 nm, rack-mounted and water-cooled, for microelectronics and lithography.
Continuous-wave green laser
200 W and 300 W continuous-wave green source at 536 nm, absorbed up to ten times more strongly by copper than an infrared beam.
Green laser module
Compact air-cooled OEM module, 510 to 540 nm, single-mode continuous wave with optical noise below 0.3 % rms.
Visible laser module
Single-mode module built to any wavelength from 266 to 775 nm in 0.1 nm steps, air-cooled, with linewidth under 0.1 nm.
High-power green laser
Rack-mounted continuous-wave green source to 50 W at 532 and 536 nm, water-cooled, for microelectronics and laser pumping.
Pulsed ytterbium fibre laser
Air-cooled pulsed source to 100 W average, 100 ns pulses at 2 to 500 kHz, with burst control down to a single pulse.
High-power ytterbium fibre laser
Flagship multi-module source to 60 kW at 1070 nm, above 45 % wall-plug efficiency, with back-reflection protection for copper and aluminium.
Medium-power industrial fibre laser
Compact kilowatt-class continuous-wave source to 6 kW in a 2U rack, with a built-in dryer for high-humidity plants and a 36-month warranty.
Single-mode fibre laser
Single-mode continuous-wave source to 2 kW with M² below 1.1, for precision cutting, SLM printing and welding reflective metals.
Quasi-CW fibre laser
Quasi-continuous source: 1.5 kW average, 15 kW peak, 150 J pulse energy, at above 30 % wall-plug efficiency.
Internal thread hardening attachment
Optical head that hardens internal surfaces up to 150 mm deep through a hole as small as 70 mm, with a camera for setting the path.
Laser welding unit with wire
Wire-feed attachment for FLW D50 heads: filler wire, shielding gas, optics protection, seam tracking and coolant distribution in one compact body.
Processing systems
Complete machines rather than a source on a bench: a micromachining platform for wafers and thin films, a five-axis hydrolaser complex that cuts with no heat-affected zone, and a configurable welding and cladding system for bodies of revolution. Each is commissioned against a sample part rather than against a datasheet.
Micromachining installation
Micromachining platform for ablative separation of thin films and wafers, with ±5 µm positioning, an air-cushion rotation axis and machine vision.
Hydrolaser cutting complex
Five-axis CNC hydrolaser complex: burr-free cutting with no heat-affected zone, no focus adjustment, and micro-holes in ceramics, diamond and composites.
Laser processing system
Machine-type system for bodies of revolution and shaped parts, configurable for laser welding, cladding or heat treatment.
Handheld systems
Welding up to four times faster than TIG with almost no distortion, and pulsed cleaning at up to 60 m² an hour with no consumables and no grit. Both run from an ordinary supply and both can be picked up and carried to the work — fabrication bays, maintenance shops and site work — and the welder can also be mounted on a robot.
Handheld laser welding system
Handheld welding to 6 mm in steel and aluminium, up to four times faster than TIG, with beam oscillation to 5 mm and a cladding function on the Plus.
Laser cleaning system
Pulsed cleaning to 60 m² per hour at Sa 2.5, air-cooled, from a 220 V supply — around ten times cheaper to run than sandblasting.
Medical systems
Surgical fibre laser platforms and the delivery fibres that go with them. Regulatory status is stated per product and per market.
Optics and components
A full line of optical components made in the same house as the sources they serve: fibre-optic cables and optical elements, collimators, beam combiners and switches, process heads and cutting and welding heads rated to 60 kW, with powder and wire feeding nozzles. Because they come from the same supplier as the laser, the interfaces are known rather than negotiated — every source in the catalogue takes a standard QBH HLC-8 connector, so a head or a collimator is interchangeable across the range. Available with a laser or on their own.
Four-axis cladding nozzle attachment
Four-sided powder and shielding-gas feed into the focus, for cladding that does not care which direction the head is travelling.
Ultra-high-power cutting head
Optical cutting head for 20 and 40 kW sources, light enough for ultra-high-speed machine mechanics and sealed against dust.
Customised solutions
Builds specified from the requirement rather than from the catalogue: a source, a cell or an optical train designed around a process, a programme document or an existing machine.