Laser sources
Ten fibre sources, from a 24 V air-cooled OEM module to a 60 kW multi-module cabinet, and from continuous wave through nanosecond and quasi-continuous pulses. Ultraviolet, green and the visible range are covered by frequency conversion rather than by a second technology, so one supplier answers for the whole wavelength span. Specified by what the process needs at the workpiece, not by the largest number on the sheet.
Continuous-wave UV laser
Single-mode continuous-wave ultraviolet source at 355, 311 and 266 nm, rack-mounted and water-cooled, for microelectronics and lithography.
Continuous-wave green laser
200 W and 300 W continuous-wave green source at 536 nm, absorbed up to ten times more strongly by copper than an infrared beam.
Green laser module
Compact air-cooled OEM module, 510 to 540 nm, single-mode continuous wave with optical noise below 0.3 % rms.
Visible laser module
Single-mode module built to any wavelength from 266 to 775 nm in 0.1 nm steps, air-cooled, with linewidth under 0.1 nm.
High-power green laser
Rack-mounted continuous-wave green source to 50 W at 532 and 536 nm, water-cooled, for microelectronics and laser pumping.
Pulsed ytterbium fibre laser
Air-cooled pulsed source to 100 W average, 100 ns pulses at 2 to 500 kHz, with burst control down to a single pulse.
High-power ytterbium fibre laser
Flagship multi-module source to 60 kW at 1070 nm, above 45 % wall-plug efficiency, with back-reflection protection for copper and aluminium.
Medium-power industrial fibre laser
Compact kilowatt-class continuous-wave source to 6 kW in a 2U rack, with a built-in dryer for high-humidity plants and a 36-month warranty.
Single-mode fibre laser
Single-mode continuous-wave source to 2 kW with M² below 1.1, for precision cutting, SLM printing and welding reflective metals.
Quasi-CW fibre laser
Quasi-continuous source: 1.5 kW average, 15 kW peak, 150 J pulse energy, at above 30 % wall-plug efficiency.
Internal thread hardening attachment
Optical head that hardens internal surfaces up to 150 mm deep through a hole as small as 70 mm, with a camera for setting the path.
Laser welding unit with wire
Wire-feed attachment for FLW D50 heads: filler wire, shielding gas, optics protection, seam tracking and coolant distribution in one compact body.